iSpring T32M RO Storage Tank Reviews

The iSpring T32M is one of the best RO storage tanks out there for residential Reverse osmosis systems. It’s well designed and functions very well with most RO systems.

It’s a 4-gallon tank and can hold up to 3.2 gallons of filtered water when full which is a pretty decent amount for residential use.

The tank comes pre-pressurized between 7 to 10 psi and has a maximum working pressure of around 100 psi. Therefore, it can work pretty well with municipal feed water pressure as well as a boost pump.

The T32M is a perfect RO replacement tank for diverse use as it discharges effectively in both vertical and horizontal positions. It comes with a tank stand which you can use for either the vertical or horizontal position.

The water chamber is a high-quality, FDA-grade butyl diaphragm that has gone through special post-cure procedures to make sure that the water held in the tank remains safe, tasteless and odourless.

The inlet/outlet valve connection of this iSpring tank is also made of stainless steel. It won’t strip or break easily and it does prevent contamination by lead leaching.

The connection fits standard ¼“NPT thread ball valve which is fortunately included with the tank. The unit also has a standard air nozzle at the bottom part which you can use to adjust the air pressure inside the tank if needed.

In short, the iSpring T32M is a superb storage tank perfect for use with under-sink RO systems and has enough capacity to meet the daily clean water demand in a household.

Read moreiSpring T32M RO Storage Tank Reviews

tankRo 4 Gallon RO Storage Tank Reviews

Following the iSpring T32M is the tankRo water storage tank which is yet another quality and highly-reliable RO storage tank for replacement on the market today.

When you look at it, it’s much similar to the iSpring T32M in terms of design and physical specifications. It features a 4-gallon storage tank with a water chamber area that can hold a maximum of 3.2 gallons of water at one time.

The rest of the storage area is occupied by the air bladder which has been pre-pressurized to help in drawing water from the tank. It comes pre-charged at 7 psi and has a maximum working pressure of up to 100 psi.

The great thing about this tankRo storage tank is that it’s well designed to ensure consistent air pressure. It has a sealed brass air nozzle with o-ring air valve caps which not only prevents the loss of air from the vent but also keeps the diaphragm from damage.

This tank is also made to ensure you get clean and contaminant-free water that always tastes fresh and pure. The inside line of the water chamber is made from high-quality virgin polypropylene which is a smooth and durable liner.

The liner ensures that the remains odourless, tasteless and free from contaminants while in the tank. The diaphragm is a post-cured Chlorobutyl rubber which also means no chemicals leaking in your water, so it remains safe and clean inside the tank before drawing it.

The inlet/outlet connection is strong stainless steel and it can fit a ¼”NPT valve which is as well included in the package.

Overall, the tankRo water storage tank has heavy-duty construction and can last many years. It’s a reliable and fully functional RO storage tank that would fit under most kitchen sinks. It also comes with a stand that you can use to secure it.

Read moretankRo 4 Gallon RO Storage Tank Reviews

APEC Water TANK-4 RO Tank Reviews

The APEC TANK-4 is a standard RO tank that offers a quality water storage option to ensure a consistent supply of water to your household.

Like the other two models above, this one too is a 4-gallon tank that is capable of holding up to 3.2 gallons of water when it’s completely filled.  That’s enough capacity to cater for the needs of most small to average families.

The unit discharges water efficiently whether it’s placed in vertical or horizontal position and it features a stand to allow you easily and comfortably use the tank in both positions.

It comes pre-pressurized to around 7 psi and can equally operate at a maximum pressure of 100 psi.  It’s effectively designed to provide airtight protection against leaks as well as contamination.

The shell is constructed from heavy-duty stainless steel which surrounds a fully enclosed virgin polypropylene liner and high-grade, post-cured butyl diaphragm. This robust and very efficient construction ensures zero leaks and eliminates all risks of contamination.

Therefore, when you open the faucet, you can expect to get tasteless, odourless water that’s clean and free from contaminants.

The connector is made from stainless steel, so no leaching either and it’s compatible with the standard ¼” RO tank ball valve. Quality, safety, and durability are what this APEC TANK-4 offers and it another great option for replacing a faulty old tank.

Read moreAPEC Water TANK-4 RO Tank Reviews

Purenex PRO RO Storage Tank Reviews

Purenex PRO RO storage tank is an equally great replacement tank for any residential RO systems. It’s a compact but quality unit that’s built to integrate and function smoothly to deliver clean water.

Being a standard 4-gallon tank, the Purenex PRO can comfortably hold about 3.2 gallons of purified water which sufficient to maintain a continues and table supply suitable for small to average size families.

The air bladder comes pre-charged with around 5 to 7 psi of air pressure and when the tank is filled up, the pressure may reach 30 to 50 psi depending on the pressure of the feed water supply.

Inside the tanks is a full enclosed polypropylene liner which forms the upper compartment of the water chamber. A post-cured butyl diaphragm separates the water chamber and the air bladder.

These materials are approved for safety and quality. They eliminate the possibility of odours and a metal taste in the water as well as provide airtight protection against contaminations and leaks.

The water inlet/outlet thread is also made of stainless steel to prevent leaching and it will fit a standard ¼” MPT ball valve.  

Installation is pretty easy and you can as well easily re-pressurize the tank using an air pump just right through the air valve below the bottom bladder.

Read morePurenex PRO RO Storage Tank Reviews

Charman 420005 RO Storage Tank Reviews

Taking the fifth spot on our list is the Charman Manufacturing 420005 storage tank. This is another quality unit and a very good replacement for a damaged or old RO storage tank.

To start, the water chamber of the tank can hold a maximum of 3.2 gallons which is a standard capacity we’ve seen in all the other four models reviewed above.

The air chamber, on the other hand, comes pre-pressurized to around 8 to 10 psi but once hooked the water storage pressure can be around 40 to 55 psi. Therefore, it can work well with the normal pressure on city water which is about 60 psi or even a maximum pressure of 100 psi.

The overall construction is quite robust too with a high-grade steel shell that covers polypropylene line and a butyl rubber diaphragm which form the water chamber.

All these materials are of good quality and CE approved which guarantee the quality and safety of the water that’s stored inside the tank and delivered to your tap when you open the faucet. They eliminate contamination and the possibility of odours. 

The stainless steel connector is compatible with the ¼” NPT ball valve and the whole tank is a breeze to install. It would take only a few minutes to set it up as long as you got some Teflon tape.

It looks good and works great. The Charman Manufacturing 420005 storage tank is an ideal choice for average to large families. It ensures a continuous supply of filtered water at a decent rate. The only downside is that it doesn’t come with a new shut off valve.

Read moreCharman 420005 RO Storage Tank Reviews

Geekpure RO Storage Tank Reviews

The Geekpure RO storage tank is a small and compact unit but still very functional and a nice option as a replacement tank for most home reverse osmosis systems.

It can hold up 2.8 gallons of purified water which is small compared to what the other units above offer but it’s just enough to meet the daily needs of small to average families. Its compact design allows it to easily fit under a sink or a place with space constraints.

The pre-charged pressure when the tank is empty is 5 to 7 psi and the tank can work with a feed water pressure of up to 100 psi.

The outer shell of the tank is made of durable stainless steel while the water chamber consists of a full food grade polypropylene liner with a butyl diaphragm. Therefore, no chemicals, unpleasant odour or taste is going to be in your drinking water.

Same as the other storage tanks, the connector on this one is made of stainless steel and it will fit any ¼” NPT ball valve which is not included with the tank.

In general, while it may seem small in terms of capacity and size, this Geekpure RO storage tank will get the job done as far as storing and delivering clean water is concerned.

It delivers the water at a stable yet fairly fast rate making a wonderful option for small families that have an RO system installed in their homes.

Read moreGeekpure RO Storage Tank Reviews

tankRo GTS6 RO Storage Tank Reviews

If your current RO tank is small and you are looking for a great replacement tank that will give you a little more capacity yet still fit under the sink for your reverse osmosis system, then the tankRO GTS6 storage tank might just be the right choice for you.

This is a 6 gallon RO tank that can hold up to 4.4 gallons of filtered water which is a fairly large capacity that can comfortably serve average as well as big families.

The tank arrives pre-charged at 10 psi with the inside completely smooth to prevent any damages to the bladder.

The inside liner that makes up the water chamber is made of virgin polypropylene while the adjustable bladder is a high-grade Chlorobutyl rubber that’s totally airtight.

Generally, all the components are of high quality and FDA grade and 100% food-safe hence the water will remain completely clean in the tank without any chances of contamination.

The overall construction is also heavy-duty with the exterior part of the tank consisting of a two-part epoxy primer coating that’s finished with polyurethane.

Therefore, it’s not only designed to resist damage but to also last for even more than five years. You get a free ¼” ball valve together with the tank and a stand also to help secure it in the right position.

If you’ve been struggling with the small capacity of your current RO tank, then we would recommend checking out this tankRO GTS6 storage tank because you won’t have to worry anymore about running out of freshwater. 

Read moretankRo GTS6 RO Storage Tank Reviews

iSpring T20M RO Storage Tank Reviews

The iSpring T20M is a perfect choice for anyone seeking a much higher capacity to add to their residential or commercial RO system. It’s a tank that you can use with your under-sink RO system or as your whole house water storage with the existing RO system.

The unit is a 20-gallon RO tank with a capacity to hold up to 14 gallons of water making it the largest capacity in our list.

Its big-sized water chamber makes it an ideal choice for larger households whose demand for clean water is high or for commercial RO systems that required to constantly supply clean water in fairly large volumes. You can fill 8 gallons at one time and still have more water left over.

The bladder air pressure when you get the tank is about 7 psi at the minimum and about 10 psi maximum. This is when it’s empty but its maximum working pressure is around 100 psi.

Whether placed horizontally or vertically, the tank discharges efficiently. Plus both the post-cured butyl diaphragm and the polypropylene liner is FDA listed, food-grade materials which means a contaminant-free water chamber that ensures tasteless and odourless water supply.

The tank features a stainless steel connector like the rest but it uses a 3/8″ shut-off valve which both are not included with tank. Nonetheless, if it’s a larger capacity you are after, then this might be the best choice.

Read moreiSpring T20M RO Storage Tank Reviews

CrystalClear RO Storage Tank Reviews

The CrystalClear RO storage tank is another large-sized tank that’s specially designed for residential RO systems.

It’s not as large as the iSpring T20M as it can easily fit under your sink but it does offer plenty of capacity than all the other tanks apart from the T20M of course.

The unit can hold up to 10.3 gallons of water with ideal pressure which gives you plenty of purified water ready to go whenever you want. With this capacity, you can fill several gallons of jugs without causing any slowing of flow.

The tank’s air pressure when it’s new and empty is around 7 psi which you can fill up to not more than 10 psi. When the water chamber is full, the air pressure is about 30 to 40 psi, so it can effectively work with a feed water pressure of 60 to 100 psi.

The discharge is as well efficient in both vertical and horizontal positions and unlike the other models, this CrystalCLear tank has its air valve mounted on the side which is quite convenient in terms of adjusting the air pressure inside.

The water chamber is made up of virgin polypropylene liner and butyl diaphragm which as mentioned several times in the other reviews are food-grade materials that ensure tasteless and odourless water.

To sum it all, this a quality tank with sufficient capacity to meet the need of almost any residential household. If you need a larger RO replacement tank that can fit under your sink, then this is also worth checking.

Read moreCrystalClear RO Storage Tank Reviews

PA-E RO-122 RO Water Storage Tank Reviews

Closing our top 10 best RO storage tanks list is the PA-E RO-122 which is a compact unit specifically designed for those seeking a small, space-saving solution for their small household.

The tank has a capacity rating of 3 gallons but the water chamber can hold a maximum of 2 gallons. It’s the smallest capacity compared to the rest but it’s enough for one or two people.

The compact size of the tank makes it even more appealing if you have little room under the sink. The air bladder comes pressurized at 8 psi and it can work with a feed water pressure of up to 100 psi.

You will notice no odd tastes or smell when using this tank because all the internal components are made of FDA-compliant materials. So no rubber or metal smell and taste or any contamination is going to happen.

The stainless steel shell is very robust and durable plus the 1/4” threaded connection is made of stainless steel too to prevent lead leaching.

Unfortunately, like the iSpring T20M, this unit does not come with a tank valve as well, so you might have to use the old one or get a new one separately. All in all, if you want a smaller tank that can fit a constricted cabinet area, then the PA-E RO-122 is a good option.

Read morePA-E RO-122 RO Water Storage Tank Reviews