Watts Premier 560018 50GPD RO Membrane Reviews

The final replacement membrane on this list is the Watts Premier 560018 which is a 50 GPD membrane designed to fit all standard RO systems except the quick-change systems.

The Watts Premier 560018 has 0.0001-micron pores that provide a high contaminant rejection rate of 98%. In other words, it will eliminate any microscopic or dissolved impurity that’s larger than 0.0001 micron which basically means almost everything will get filtered out leaving only the water molecules to pass through to the RO storage tank.

The membrane has a similar design to all the other Watts Premier membranes equipped with a check valve inside to facilitate efficient performance without backflow of water into the cartridge.

It will work perfectly with Watts 4SV, 5SV, Manifold as well as Zero Waste systems, and can last up to 5 years before requiring replacement.

Read moreWatts Premier 560018 50GPD RO Membrane Reviews

Watts Premier 105331-G RO Membrane Reviews

If you have a Watts Premier RO-PURE or RO-PURE PLUS unit that’s not performing to its maximum potential or you planning to get one, then the Watts Premier 105331-G replacement membrane would be a great investment.

This 50 GPD membrane will certainly get the production rate of the RO system pumped back up to the optimal level it was when the unit was new.

With a 98% rejection capacity, it will equally enhance the efficiency of your system in dealing with all kinds of contaminants in your water from heavy metals to microorganism and TDS. Plus, it capable of removing more than 99.95% of cysts like Cryptosporidium and Giardia.

The membrane is easy to install and it has a check valve placed inside it to prevent any chances of backflow of water. Its life span is 2 to 5 years and as I mentioned above, this particular model is only compatible with the Watts Premier RO Pure and Pure Plus systems.

Read moreWatts Premier 105331-G RO Membrane Reviews

Watts Premier 560014 24 GPD RO Membrane Reviews

The Watts Premier 560014 is a quality replacement RO membrane typically designed for Watts’ Premier standard RO systems.

This thin-film composite RO membrane features a plethora of tiny 0.0001-micron pores which can trap up to 98% of contaminants in the water. The membrane will effectively remove total dissolved solids, microorganisms like bacteria, viruses and protozoan cysts, and heavy metals such as lead, copper, radium, arsenic and lead.

It has the capacity to produce a maximum of 24 gallons of purified water in a day. Thereby, if your Watts System uses the 18 GPD membrane, then you can switch it to this 24 GPD membrane to get slightly higher output from the unit.

Moreover, like all the other Watts Premier RO membranes, this one too utilizes an internal check valve. Many RO systems often have the check valve placed right in the elbow of the unit hence they tend to wear out quickly over time and become less efficient.

By having the check valve installed into this Watts RO membrane, you are guaranteed efficient performance since the already used check valve will also get replaced alongside the membrane.

In terms of compatibility, the Watts Premier 560014 replacement membrane will work any of the standard Premier RO systems. More specifically, it will fit the 4SV, 5SV, Manifold or Zero Waste system. It can as well be compatible with other standard RO systems as long as it’s not a quick-change system. Based on your local water conditions, frequency of filter changes and your use pattern, you can expect to get 2 to 5 years of service from this 24GPD Watts Premier replacement membrane.

Read moreWatts Premier 560014 24 GPD RO Membrane Reviews